Email to Advanced Chemicals Specialities Pakistan Email Us  
Home|About Us|Products|Raw Materials |News|Contact Us
  Welcome Guest!
  Advanced chemicals Specialities was introduce in Pakistan in 1992, providing the services at its level best. As time passes, the productivy in chemical sector increases.  
slide show
Featured Products
  Category > Sizing Softners > Advasoft GT  
  Advasoft GT  
Added By :Abd-e-Ali | Visits: 10731  
Chemical Name: N/A
  Chemical Family: Emulsified Polyethylene based  
  Chemical Formulae : N/A  
  Product Use: Softener smoothening of weaving and knitting yarns and for wool tops  
  Product Note : Main use in sizing to reduce friction and increase surface smoothness  
  Testing Data Sheet for Advasoft GT Print version
  Advasoft GT is an excellent softener for smoothening of weaving and knitting yarns and for wool tops. The use of Advasoft GT reduces the fibre/metal and fibre/fibre friction by nearly 50% compared to untreated material. Advasoft GT has very good exhausation properties, which leads to high exhaustion rates (upto 90% and more) and good distribution on the bobbin. Advasoft GT may be also be applied on knitted goods to improve the sewability
  Typical Data:
  Chemical Character    
  Emulsified polyethylenes
  Appearance : Slightly beige to cream color
  Active Ingredient % : 22%
  PH value : 6
  Storage Stability    
  upto 6 months, under normal conditions of temperature and pressure
  Advasoft GT Conc :
  Specific Properties:    
Gives high surface smoothness
Gives soft, supple handle
Stable against high liquor turbulency
  Special Features:    
Has antistatic effects.
It is Substantive.
Low foaming.
Does not affect dyeing fastness.
  Application :
  Dissolving Method :    
    Soluble in water in any ratio
  Processes :    

  • Substrate: Yarns made of CO,WO PAC and their blends and wool tops
    Machines: All kind of dyeing machines, backwashing machine

    • Exhaust Application
    • Use 1-3% o.w.f Advasoft GT at pH 6-7 Exhaust at 40C-50C, Run for 20 minutes
    Fully Flooded HT-Dyeing Machines
    a) Addition via dosage pump
    b) Addition dissolving tank Short liquor dyeing machine
    Dosage via dissolving tank
    Open dyeing and after treatment unit
    Direct addition of the product after material carrier has been entered. Rebeaming process

    2-3% (weight of fabric)
    Already applied softener has to be washed off by 2g/l Advawet MH (70C for 20 mins), afterwards rinsing and re-dyeing. Tops
    Backwashing machine: 12g/l Advasoft GT Pickup: 50%
      End Note:    
      All information quoted above is based on our experience and actual know-how, but it is given without guarantee and obligation. Recommendation on the application and use of our products should be adapted to the particular works, conditions and other materials employed
      MSDS (Material Safety Data Sheets) Advasoft GT  
      Section 1 Complete Details | Print version  
      Composition/Information on Ingredients  
      Section 2 Complete Details | Print version  
      Hazards Identification  
      Section 3 Complete Details | Print version  
      First Aid Measures  
      Section 4 Complete Details | Print version  
      Fire Fighting Measures  
      Section 5 Complete Details | Print version  
      Accidental Release Measures  
      Section 6 Complete Details | Print version  
      Handling and Storage  
      Section 7 Complete Details | Print version  
      Exposure Controls/Personal Protection  
      Section 8 Complete Details | Print version  
      Physical and Chemical Properties  
      Section 9 Complete Details | Print version  
      Stability and Reactivity  
      Section 10 Complete Details | Print version  
      Toxicological Information  
      Section 11 Complete Details | Print version  
      Ecological Information  
      Section 12 Complete Details | Print version  
      Disposal Considerations  
      Section 13 Complete Details | Print version  
      Transport Information  
      Section 14 Complete Details | Print version  
      Regulatory Information  
      Section 15 Complete Details | Print version  
      Other Information  
      Contact Information  
      Contact Person : Abde-Ali Bohra  
      Emergency Phone 800-424-9300  
      Office Phone 0092-21-36702224  
      Cell No 0092-21-36702224  
      Fax No 0092-21-36702224  
      Factory Location Plot No.363, Gabol Town, North Karachi Industrial Area, Karachi Sindh Pakistan  
    News Feeds
    Our Reports
    Job Openings
    Our Link Bridge